{"product_id":"srw-path-stabilizer","title":"SRW Path Stabilizer","description":"\u003cp\u003ePATH STABILIZER™ INSTRUCTIONS\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eSUBGRADE\u003c\/li\u003e\n\u003cli\u003eExcavate between 4–6˝ below finished grade.\u003c\/li\u003e\n\u003cli\u003eCompact native soil using a plate compactor.\u003c\/li\u003e\n\u003cli\u003eUse a high water flow geotextile (\u003ca href=\"https:\/\/srwproductscom.wpenginepowered.com\/product\/sb2\/\" rel=\"nofollow\"\u003eSRW’s SB2\u003c\/a\u003e or \u003ca href=\"https:\/\/srwproductscom.wpenginepowered.com\/product\/sb3\/\" rel=\"nofollow\"\u003eSB3\u003c\/a\u003e), ensuring that the fabric is enough to wrap up the edges of the excavated areas.\u003c\/li\u003e\n\u003cli\u003eAdd and compact between 2–4˝ of base, making sure this material is 2˝ below the finished height of the walkway.\u003c\/li\u003e\n\u003cli\u003eEDGING\u003c\/li\u003e\n\u003cli\u003ePlace edge restraint, framing the walkway. This step is necessary to prevent the edges from breaking down with use.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/srwproductscom.wpenginepowered.com\/products\/accessories#paver-rails-section\" rel=\"nofollow\"\u003eSRW Paver Rail™\u003c\/a\u003e can be held in place by landscape spikes placed every 12˝.\u003c\/li\u003e\n\u003cli\u003eINSTALL MATERIAL\u003c\/li\u003e\n\u003cli\u003eInstall decomposed granite or similar material, grading 1\/2–3\/4˝ above the \u003ca href=\"https:\/\/srwproductscom.wpenginepowered.com\/products\/accessories#paver-rails-section\" rel=\"nofollow\"\u003eSRW Paver Rail™\u003c\/a\u003e to allow for final height once compacted.\u003c\/li\u003e\n\u003cli\u003eApply SRW Path Stabilizer™ using a watering can at a coverage of 20 sq. ft. per gallon. This applies to both residential and commercial installs.\u003c\/li\u003e\n\u003cli\u003eLet the material sit for 40-60 minutes. If the material is still saturated, let sit for 15 minutes longer, and check every 15 minutes until it has drained. Do not allow SRW Path Stabilizer™ to dry out completely.\u003c\/li\u003e\n\u003cli\u003eCompact the entire surface. Make multiple passes with the compactor. If the surface is too saturated, the compactor will slow or stop. Wait until the material has drained and this no longer happens before continuing. Areas that were compacted too early can be lightly raked and re-compacted.\u003c\/li\u003e\n\u003cli\u003ePOST COMPACTION \u0026amp; TOP COAT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRESIDENTIAL:\u003c\/strong\u003e Apply a top coat of SRW Path Stabilizer™ at a coverage rate of 50 sq. ft. per gallon 24 hours after compaction. The surface must be dry before applying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOMMERCIAL:\u003c\/strong\u003e Apply SRW Path Stabilizer™ at a coverage of 30 sq. ft. per gallon. Wait 24 hours and apply a top coat of 40 sq. ft. per gallon. The surface must be dry before applying the top coat.\u003c\/li\u003e\n\u003cli\u003eUSER TIPS\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAvoid use on clean store i.e. pea gravel\/chip stone, decorative rock, or sand.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eFor use with 3\/8˝ to 1\/4˝ (1 cm – 0.6 cm) minus angular rock with fines. Up to 3\/4˝ (2 cm) minus can be used if tested first.\u003c\/li\u003e\n\u003cli\u003eBefore install, have a solid base to improve overall performance.\u003c\/li\u003e\n\u003cli\u003eApply when temperature is between 50°–80°F (10°–26°C).\u003c\/li\u003e\n\u003cli\u003eAllow up to 72 hours to fully cure, with temperatures staying above 50°F (10° C).\u003c\/li\u003e\n\u003cli\u003eConsider water runoff and drainage when designing walkway\/ patio (do not slope toward buildings).\u003c\/li\u003e\n\u003cli\u003eEdge restraints: SRW Paver Rail\u003cstrong\u003e™ \u003c\/strong\u003eis recommended for best results.\u003c\/li\u003e\n\u003cli\u003eTest in a small, discrete area before use.\u003c\/li\u003e\n\u003cli\u003eMaintenance coat maybe required after 12-12 months.\u003c\/li\u003e\n\u003cli\u003eCOVERAGE\u003c\/li\u003e\n\u003cli\u003eRESIDENTIAL: Up to 75 sq. ft. per 5 gallons (6.97 sq. m per 18.93 liters).\u003c\/li\u003e\n\u003cli\u003eCOMMERCIAL: Up to 50 sq. ft. per 5 gallons (4.65 sq. m per 18.93 liters).\u003c\/li\u003e\n\u003cli\u003eCLEAN UP\u003c\/li\u003e\n\u003cli\u003eRinse off all equipment with clean water and let dry.\u003c\/li\u003e\n\u003cli\u003eSTORAGE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKEEP FROM FREEZING. \u003c\/strong\u003eStore container in a cool area with cap or lid firmly in place.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"SRW Products","offers":[{"title":"Default Title","offer_id":51412022165822,"sku":null,"price":138.92,"currency_code":"USD","in_stock":true}],"url":"https:\/\/kclandmat.com\/products\/srw-path-stabilizer","provider":"Kane County Landscape Materials \u0026 Supply Co.","version":"1.0","type":"link"}